This article was originally distributed via PRWeb. PRWeb, WorldNow and this Site make no warranties or representations in connection therewith.
3M's new 800 series portfolio introduces new temporary surface protection tapes in an organized fashion for easier product selection with enhanced product performance.
Westminster, Maryland (PRWEB) February 11, 2014
3M Industrial Adhesives and Tapes Division released a new portfolio of temporary surface protection tapes to the US market and these are available at Strouse. This portfolio of adhesives aims to provide a temporary surface protection solution for every surface and process. In this new portfolio there are four initial adhesive categories that cover a wide variety of applications, Low Tack, Medium Tack, Medium High Tack, and Specialty. Within these four categories there are several adhesive variations to handle specific applications.
Low Tack Surface Protection Tape Films meant for smooth, high gloss surfaces such as LCD screens, painted metal, or plastic.
Medium Tack Surface Protection Tape Films meant for lightly textured or semi-gloss surfaces and bending, embossing, roll forming or shallow draw processes such as anodized aluminum, marble, painted metal, high pressure laminate and plastic.
Medium High Tack Surface Protection Tape Surface protection tapes designed for lightly textured or semi-gloss surfaces that require more than medium tack adhesive.
Specialty Surface Protection Tape Temporary protective tapes designed for porous or other unique surfaces.
These adhesives enhanced upon key areas of importance for surface protection. The 3M 800 series tapes have a very smooth peel. They are UV resistant and will remove cleanly after 3 days of direct sunlight. The 3M 800 series tapes resist cold, heat, and humidity with up to 38% less haze and up to 7% more clarity with less yellowing. These temporary protection tapes are smooth and quieter on removal, up to 23% quieter with less than 85 dbl. They are also repositionable with a better wet-out and less bubbling and tunneling. This allows you to stick the adhesive to a surface, remove it and place it on the surface again without any significant loss of performance.
Strouse is a 3M preferred converter of pressure sensitive adhesives and flexible materials. This lasting partnership provides you access to the best adhesives in the world from 3M with one of the most technologically advanced converters in the world, Strouse. Strouse can die cut 3M 800 series temporary protection tapes to custom sizes to meet your application needs.
Strouse is a die cut adhesive manufacturer with over 25 years of industry experience. Serving the military and defense, automotive, appliance, renewable energy, and the medical industry, Strouse continues to innovate. With a quality management system currently registered to ISO 9001:2008 standards, Strouse not only has a commitment to quality but excellent customer service. A full team of design and development engineers allows Strouse to invest the necessary time and resources for each and every project. Located in Westminster, Maryland, Strouse can be contacted directly at 800-410-8273 or go to our website for more info at http://www.strouse.com or visit our blog MoreThanTape.com
For the original version on PRWeb visit: http://www.prweb.com/releases/3M-800-Series-Portfolio/Die-Cut-at-Strouse/prweb11559617.htm
Information contained on this page is provided by an independent third-party content provider. WorldNow and this Station make no warranties or representations in connection therewith. If you have any questions or comments about this page please contact email@example.com.